A/C Refrigerant Leak Repair and R-410A Recharge in Del Mar

When an A/C system starts losing its ability to cool properly, a refrigerant leak is usually the culprit. It's one of the most common service calls we get especially when summer temps push systems hard day after day. The unit runs, but it just can't keep up.

This call in Del Mar was exactly that. The system had a refrigerant leak that needed to be located and addressed before we could do anything else. Skipping the leak repair and just topping off the refrigerant is a band-aid fix. The charge will bleed off again, the system will underperform, and you'll be right back to square one - or worse, dealing with compressor damage down the road.

Once the leak was handled, we hooked up our manifold gauge set to check system pressures and dialed in a proper R-410A recharge. Getting the charge right isn't guesswork. It takes the right equipment and a solid read on the system's operating conditions to bring everything back to factory spec.

The unit is a multi-zone setup with a fair amount going on inside the electrical compartment. That kind of system needs someone who actually knows what they're looking at. We take our time on these calls. A rushed recharge on a system like this can cause more problems than it solves.

If your A/C is running but not keeping up, or you've had to top off refrigerant more than once, it's worth getting a proper leak check done. A well-charged system runs more efficiently, keeps your space comfortable, and puts less strain on the compressor over time.